高强不锈钢绞线网与ECC黏结-滑移关系模型

高强不锈钢绞线网与ECC的黏结是二者协同工作的基础，且黏结 滑移关系模型是其黏结性能的综合反映，故通过对17组51个高强不锈钢绞网增强ECC薄板试件进行单边拉拔试验，研究横向钢绞线间距、纵向钢绞线直径和相对锚固长度等因素对钢绞线网在ECC中黏结性能的影响规律。试验结果表明，横向钢绞线的设置可使黏结破坏由脆性破坏转变为延性破坏；高强不锈钢绞线网与ECC的黏结滑移曲线可分为5个阶段，分别为上升段、微降段、延性强化段、下降段和残余段。基于试验结果，对钢绞线网在ECC中的黏结破坏特征和黏结 滑移机理进行分析，在相关黏结-滑移关系模型的基础上，提出钢绞线网与ECC的黏结 滑移关系模型，并进行模型参数分析。所提模型及模型参数计算公式与试验结果吻合良好，能较好地反映钢绞线网与ECC的界面黏结滑移特征。     

汽车悬架球头拉杆冷成形技术

为提高生产效率、改变原来通过车削加工汽车悬架球头拉杆的方式,提出了一种球头拉杆的多工位冷镦成形工艺。基于DEFORM-3D软件建立了有限元模型,对球头拉杆的塑性成形过程进行了仿真,研究了预成形凸模入模角α、预成形凹模圆角R1、终成形凹模圆角R2以及终成形凹模入模角β等工艺参数对球头拉杆成形的影响,并进行了正交试验,以模具在球头拉杆成形过程中所受载荷及工件损伤值为优化目标,获得了合理的工艺参数组合。结果表明:在保证工件成形质量及模具寿命的前提下,当预成形凸模入模角α为30°、预成形凹模圆角R1为12 mm、终成形凹模圆角R2为3 mm、终成形凹模入模角β为60°时,模具载荷及工件损伤有显著的降低。采用优化后的参数进行试模生产,工件成形质量较好,验证了模拟结果的可信性,能够有效地指导工艺设计人员的设计工作。     

One‐shot radical polymerization of vinyl monomers with different reactivity accompanying spontaneous delay of polymerization for the synthesis of double‐network hydrogels

Double‐network hydrogels were conveniently synthesized by the one‐shot radical polymerization of an ionic monomer for the first network and a non‐ionic monomer for the second network in the presence of crosslinkers by simultaneous addition of the monomers, that is, one‐shot and spontaneous two‐step polymerization accompanying the delay of polymerization of a second network monomer. We analyzed the polymerization process based on the conversion of each monomer during the reaction in the absence of crosslinkers. Then we fabricated the double‐network hydrogels using several polymerization systems consisting of a conjugated monomer and a non‐conjugated monomer in the presence of the dual crosslinkers. We analyzed the swelling, mechanical and viscoelastic properties of hydrogels synthesized by one‐shot radical polymerization to confirm the production mechanism and the network structure of the hydrogels. © 2020 Society of Chemical Industry     

一种下肢运动意图识别算法性能实时测评系统* .txt

摘要：对腿部运动意图识别算法的实时性能进行综合可靠的评价是实现下肢假肢灵活稳定控制的前提。提出一种逐层分级的基于下肢运动意图识别算法的实时测评方法，对算法的可靠性、稳定性以及运动意图识别速度进行综合评价。利用开发的运动意图识别算法评测系统，对基于肌电信号源和机械信号源的两种运动意图识别算法进行了实时性能测试，发现肌电信号源的算法识别时间大于机械信号源算法，但是其算法稳定性优于机械信号源算法。进一步地，还利用该评测系统有效地区分出正常识别策略与异常识别策略，发现正常策略的动作识别稳定系数比异常策略高25%左右。因此，所提的基于下肢运动意图识别算法的实时测评方法，能够对不同信号源算法以及不同识别策略的实时性能进行有效评价，为智能下肢假肢控制系统开发提供可供参考的测试平台。 .txt     

一种液压摩擦焊机电液系统研究与试验

针对海上石油平台、海底输送管线维修的需要,提供了一种液压摩擦焊机液压和电器系统设计思路,通过参数计算、电液控制系统设计,研发了一种液压摩擦焊机,通过对DH38钢摩擦叠焊单元成型工艺试验,发现焊接接头拉伸强度达到了母材强度的76%以上,验证了液压摩擦焊机的可靠性能,通过该研究的应用,可对海上石油平台、海底输送管线的维修起到积极作用。     

古建筑物维修用聚合物抗裂抹灰砂浆的配合比和性能研究

采用正交试验的方法,研究了胶砂比、胶凝材料组成、速凝剂掺量、胶粉掺量对一种修复古建筑物用聚合物抗裂抹灰砂浆的抗压强度、压折强度比、收缩率和拉伸黏结强度等性质的影响,并给出了性能优化的配合比。     

A miniature triaxial apparatus for investigating the micromechanics of granular soils with in situ X-ray micro-tomography scanning

The development of a miniature triaxial apparatus is presented. In conjunction with an X-ray micro-tomography (termed as X-ray μCT hereafter) facility and advanced image processing techniques, this apparatus can be used for in situ investigation of the micro-scale mechanical behavior of granular soils under shear. The apparatus allows for triaxial testing of a miniature dry sample with a size of \mathrm{8}\hspace{0.17em}\mathrm{mm}\times \mathrm{16}\hspace{0.17em}\mathrm{mm} (diameter \times height). In situ triaxial testing of a 0.4–0.8 mm Leighton Buzzard sand (LBS) under a constant confining pressure of 500 kPa is presented. The evolutions of local porosities (i.e., the porosities of regions associated with individual particles), particle kinematics (i.e., particle translation and particle rotation) of the sample during the shear are quantitatively studied using image processing and analysis techniques. Meanwhile, a novel method is presented to quantify the volumetric strain distribution of the sample based on the results of local porosities and particle tracking. It is found that the sample, with nearly homogenous initial local porosities, starts to exhibit obvious inhomogeneity of local porosities and localization of particle kinematics and volumetric strain around the peak of deviatoric stress. In the post-peak shear stage, large local porosities and volumetric dilation mainly occur in a localized band. The developed triaxial apparatus, in its combined use of X-ray μCT imaging techniques, is a powerful tool to investigate the micro-scale mechanical behavior of granular soils.     

新型矿用旋转筛设计研究

设计一种新型矿用旋转筛,利用7个筛板安装在旋转轴上,通过变频电机带动旋转轴与筛板转动,筛条间距根据物料筛分要求来设计,从而达到对煤矿物料的分级分离目的。根据筛分规格数量,可以串联2个以上旋转筛来使用。通过EDEM和ANSYS仿真,验证设计的合理性;通过样机试验验证,表明可以对煤矿石进行很好的筛分,而且具有节能、环保和成本低等优点。     

355 MPa级转向架构架用钢连续冷却转变行为

高速动车组转向架构架对高速动车组的运行品质、行车安全起到至关重要的作用。为向355 MPa级转向架构架用钢的工业试制提供指导，在Gleeble-3800热模拟试验机上进行了热模拟试验，结合热膨胀法和金相-硬度法，绘制了355 MPa级转向架构架用钢动态连续冷却转变曲线，研究了试验钢在连续冷却条件下的显微组织演变规律。结果表明，冷速小于1 ℃/s时，其组织主要为多边形铁素体和珠光体；冷速大于5 ℃/s时，贝氏体类组织快速增加；冷速达到50 ℃/s时，为板条贝氏体组织。因此，对于355 MPa级转向架构架用钢，冷速控制在1~5 ℃/s较为适宜，其组织主要由比例适中软硬性相结合的铁素体、珠光体和贝氏体构成，可以获得优良的强韧性匹配。     

Nonlinear correlation between RMB internationalization and nonferrous metal prices

The correlation between Renminbi (RMB) internationalization and nonferrous metal prices was studied using the nonlinear Granger causality test and the dynamic conditional correlation-generalized autoregressive conditional heteroskedastic (DCC-GARCH) model. The results indicate that the relationship between RMB internationalization and nonferrous metal prices reflects a complex nonlinear mechanism. There was no mutual influence between RMB internationalization and nonferrous metal prices prior to the trials of the RMB settlement in the cross-border trade in July 2009. Since then, however, a bidirectional causal relationship between RMB internationalization and the price of copper and a unidirectional causal relationship from the price of aluminum to RMB internationalization were examined. In addition, due to the impact of extreme events, such as economic and financial crises, RMB internationalization and nonferrous metal prices are not always positively correlated but are rather occasionally negatively correlated.